We fix what's broken, fast, and we don't disappear after the invoice. Priority scheduling available across Glencoe and the surrounding zip codes.
Call +1-866-805-8548 and describe what your system is doing — the symptoms help us send a tech prepared with the right parts.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
We're not interested in being the cheapest quote on the page — we're the team that shows up in the truck, not a subcontractor we've never met. We carry the credentials Glencoe inspectors and property managers expect to see, and we keep that documentation available on request for every job, big or small.
Glencoe's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Too many homeowners in Glencoe have a story about a tech who showed up late, quoted one price, and charged another. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Glencoe is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Glencoe rooftop unit. We keep parts inventory stocked based on what actually fails most often on Glencoe's housing stock.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Glencoe dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Glencoe homeowners through financing and rebate options where available before a single piece of equipment gets ordered.
Every install ends with a performance test, confirming airflow, temperature split, and refrigerant charge are all where they should be before we consider the job finished.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services rooftop units and package systems across Glencoe, with after-hours work to avoid disrupting business.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Glencoe households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
Guarantees only mean something if a company actually honors them, so here's exactly what ours covers.
Details vary by job type and are always shared upfront, never buried in fine print.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
If anything feels off after we leave, one call gets a tech back to your Glencoe address.
A little attention to how your system is running can save you a lot of money and discomfort.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
This is one of the most common complaints we hear on service calls across Glencoe.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
No inflated "emergency surcharge" games — the number we quote is the number you pay.
Emergency calls get moved to the front of the line automatically.
We don't consider a job finished until the system is actually performing correctly.
Every technician carries current state licensing and manufacturer training.
We explain what failed, why it failed, and what the options are.
Maintenance plan members get priority scheduling and discounted rates.
We don't write these — our customers do.
"The furnace stopped working overnight and someone was at our door before 9am. The pricing was exactly what they quoted over the phone."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. You can tell these guys actually know what they're doing."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. Followed up a week later just to check everything was still running fine."
"As a property manager, having a company that actually answers after-hours calls is rare. Kept our kitchen running through the weekend rush."
"Got quotes from four different companies for a replacement and this was the only one that actually walked me through the load calculation. Would use them again without hesitation."
"Diagnosed a failed capacitor and had it swapped within the hour. No overnight surcharge shock — the price matched what dispatch quoted me on the phone."
Understanding what typically fails helps homeowners know what to watch for and when a repair call is worth making before things get worse.
Glencoe's seasonal swings put real stress on a system that isn't maintained regularly. Before the coldest stretch of the year, a heating system benefits from a full safety inspection, checking the heat exchanger, ignition system, and airflow to catch any issue that could turn into a no-heat emergency.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Glencoe area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Every tech on our Glencoe roster goes through background checks, licensing verification, and ongoing manufacturer training.
Manufacturer-certified across multiple major residential equipment lines.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
Yes — every job gets a clear quote before any repair work begins, so there are no surprise line items on the invoice.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
We never push a replacement when a straightforward repair will genuinely solve the problem.
Plan members typically see fewer surprise breakdowns because small issues get caught during routine visits.
We cover Glencoe and the surrounding communities, including the zip codes listed in our coverage section below.
Our commercial team handles rooftop units, multi-zone systems, and facility contracts alongside our standard residential repair work.
Yes, we service systems regardless of who originally installed them.
Financing options are available for qualifying replacement installations, and our team can walk you through what's currently offered.
Systems that run harder due to heavy year-round use may benefit from more frequent check-ins.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
For commercial accounts or rental properties, a designated point of contact or property manager can coordinate access instead.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Glencoe.
A full system replacement is one of the bigger home expenses most people face, and we don't expect everyone to pay it in a single lump sum. If a rebate or local incentive program applies to your Glencoe installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
Coverage extends across Glencoe proper and into the nearby zip codes listed below.
Coverage isn't limited to a single neighborhood or subdivision — our Glencoe dispatch zone stretches across the metro area and into the surrounding suburbs and unincorporated communities.
